IEI Integration KINO-945GSE2 - Manual (Page 102)

KINO-945GSE2 Motherboard
Page 90
Auto Fan by Duty
Cycle
Manual Mode by
RPM
The fan spins at the speed set in:
Fan PWM control
Manual Mode by
Duty Cycle
CPU Temp. Limit of Highest [050]
WARNING:
CPU failure can result if this value is set too high
The fan will turn off if the temperature falls below this value.
Minimum Value: 0°C
Maximum Value: 127°C
Temp. Limit of Start [020]
WARNING:
CPU failure can result if this value is set too high
When the fan is off, it will only start when the temperature exceeds this setting.
Minimum Value: 0°C
Maximum Value: 127°C
Start PWM [070]
This is the initial speed of the fan when it first starts spinning.
PWM Minimum Mode: 0
PWM Maximum Mode: 127