IEI Integration KINO-945GSE2 - Manual (Page 99)

KINO-945GSE2 Motherboard
Page 87
Serial Port 6 IRQ [IRQ5]
Sets the interrupt address of serial port 6.
IRQ5 D EFAULT
COM6 Function
Configures the settings for serial port 6. Options outlined below.
o Function Select
Sets the mode of serial port 6.
COM port D EFAULT Sets the serial port as serial port
IR Sets the serial port for infrared communications use
o Select RS232 or RS422/RS485 [RS232]
Sets the communications protocol for serial port 6.
RS232 D EFAULT For RS-232 network
RS422/RS485 For RS-422 or RS-485 network
o IR Duplex [Full Duplex]
Sets the duplex mode.
Full Duplex D EFAULT Allows data communication in both directions
simultaneously
Half Duplex Allows data communication in one direction at a time
Parallel Port Address [Disabled]
Use the Parallel Port Address option to select the parallel port base address.
Disabled No base address is assigned to the Parallel Port
378 D EFAULT Parallel Port I/O port address is 378