4 usb connection (dual connector), Figure 4-14: serial device connector – IEI Integration KINO-945GSE2 User Manual
Page 78
KINO-945GSE2 Motherboard
Page 66
Figure 4-14: Serial Device Connector
Step 3:
Secure the connector. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
S
te
p
0
:
4.8.4 USB Connection (Dual Connector)
The external USB Series "A" receptacle connectors provide easier and quicker access to
external USB devices. Follow the steps below to connect USB devices to the
KINO-945GSE2.
Step 1:
Locate the USB Series "A" receptacle connectors. The location of the USB
Series "A" receptacle connectors are shown in Chapter 3.
Step 2:
Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface. See
6
Figure 4-15.