IEI Integration KINO-945GSE2 - Manual (Page 79)

KINO-945GSE2 Motherboard
Page 67
Figure 4-15: USB Connector
4.8.5 VGA Monitor Connection
The KINO-945GSE2 has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the KINO-945GSE2, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
KINO-945GSE2. See
6
Figure 4-16.