B.2 setup procedure for windows, B.2.1 hardware and bios setup, Etup – IEI Integration KINO-HM551 User Manual
Page 115: Rocedure for, Indows
KINO-HM551
Page 101
o
SuSe 11.2
o
SuSe 11.3
NOTE:
Installing unsupported OS versions may cause the recovery tool to fail.
B.2 Setup Procedure for Windows
Prior to using the recovery tool to backup or restore system, a few setup procedures are
required.
Step 1:
Hardware and BIOS setup
Step 2:
Create partitions
Step 3:
Install operating system, drivers and system applications.
Step 4:
Build-up recovery partition
Step 5:
Create factory default image
S
te
p
0
:
The detailed descriptions are described in the following sections.
NOTE:
The setup procedures described below are for Microsoft Windows
operating system users. For Linux system, most setup procedures are
the same with Microsoft Windows except for several steps which are
described in Section B.3.
B.2.1 Hardware and BIOS Setup
Step 1:
Make sure the system is powered off and unplugged.