B.2.2 create partitions – IEI Integration KINO-HM551 User Manual
Page 116
KINO-HM551
Page 102
Step 2:
Install a hard driver or SSD in the KINO-HM551. An unformatted and
unpartitioned disk is recommended.
Step 3:
Connect an optical disk drive to the KINO-HM551 and insert the recovery CD.
Step 4:
Turn on the system.
Step 5:
Press the <DELETE> key as soon as the system is turned on to enter the BIOS.
Step 6:
Select the connected optical disk drive as the 1
st
boot device. (Boot
Boot
Device Priority
1
st
Boot Device).
Step 7:
Save changes and restart the computer. Continue to the next section for
instructions on partitioning the internal storage.
S
te
p
0
:
B.2.2 Create Partitions
To create the system backup, the main storage device must be split into two partitions
(three partitions for Linux). The first partition will be for the operating system, while the
second partition will be invisible to the operating system and contain the backup made by
the one key recovery software.