IEI Integration KINO-HM551 - Manual (Page 78)

KINO-HM551
Page 64
Figure 4-20: DVI Connector
Secure the connector. Secure the DVI-D connector from the digital display device to the
external interface by tightening the two retention screws on either side of the connector.
Step 0:
4.9 Software Installation
All the drivers for the KINO-HM551 are on the CD that came with the system. To install the
drivers, please follow the steps below.
Step 1: Insert the CD into a CD drive connected to the system.
NOTE:
If the installation program doesn't start automatically:
Click "Start->My Computer->CD Drive->autorun.exe"
Step 2: The driver main menu appears (Figure 4-21).