Figure 5-14: sata drive cable connection – IEI Integration IMBA-XQ354 v1.10 User Manual
Page 106
Advertising
Page 86
Figure 5-14: SATA Drive Cable Connection
Step 3:
Connect the cable to the SATA disk. Connect the connector on the other end
of the cable to the connector at the back of the SATA drive. See
9
The SATA power cable is an optional item that must be purchased
separately
Step 4:
Connect the SATA power cable. Connect the SATA power connector to the
back of the SATA drive. See
9
Advertising