Figure 8-8: enterprise, Figure 8-9: enable network interface – IEI Integration IMBA-XQ354 v1.10 User Manual
Page 202
Advertising
IMBA-XQ354 Motherboard
Page 182
Figure 8-8: Enterprise
Step 9:
Select TCP/IP (in Intel AMT Configuration) and press Enter. A message prompts
for disabling network interface. Enter N to enable network interface.
Figure 8-9: Enable Network Interface
Step 10:
Enable or disable DHCP. DHCP is enabled by default. If DHCP is disabled, enter
the following TCP/IP settings:
Advertising