IEI Integration IMBA-XQ354 v1.10 - Manual (Page 108)

IMBA-XQ354 Motherboard
Page 88
Step 3: Insert the cable connectors . Once the cable connectors are properly aligned
with the USB connectors on the IMBA-XQ354, connect the cable connectors to
the on-board connectors. See
9
Figure 5-16.
Figure 5-16: Dual USB Cable Connection
Step 4: Attach the bracket to the chassis. The USB 2.0 connectors are attached to a
bracket. To secure the bracket to the chassis please refer to the installation
instructions that came with the chassis. Step 0:
5.5.7 USB Cable (Four Port)
Four port USB 2.0 cables can be separately purchased from IEI. To install a four port USB
cable onto the IMBA-XQ354, please follow the steps below.