4 internal peripheral device connections, 1 sata drive connection, Nternal – IEI Integration IMBA-C2160 User Manual
Page 79: Eripheral, Evice, Onnections, Figure 4-11: wake-on lan connector pinout location
Advertising
IMBA-C2160 ATX Motherboard
Page 63
Figure 4-11: Wake-on LAN Connector Pinout Location
4.4 Internal Peripheral Device Connections
This section outlines the installation of peripheral devices to the onboard connectors.
4.4.1 SATA Drive Connection
The IMBA-C2160 is shipped with four SATA drive cables. To connect the SATA drives to
the connectors, please follow the steps below.
Step 1:
Locate the connectors. The locations of the SATA drive connectors are shown
in Chapter 3.
Step 2:
Insert the cable connector. Insert the cable connector into the on-board SATA
drive connector until it clips into place. See Figure 4-12.
Advertising