IEI Integration IMBA-C2160 - Manual (Page 83)

IMBA-C2160 ATX Motherboard
Page 67
Step 1: Locate the PS/2 connector. The location of the PS/2 connector is shown in
Chapter 3.
Step 2: Align the PS/2 connector. Align the PS/2 connector on the keyboard/mouse
cable with the PS/2 connector on the external peripheral interface.
Step 3: Insert the PS/2 connector . Once the connectors are properly aligned, insert
the PS/2 connector from the keyboard/mouse into the PS/2 connector on the
IMBA-C2160. See Figure 4-16.
Figure 4-16: PS/2 Keyboard/Mouse Connection
4.5.4 Serial Device Connection
The IMBA-C2160 has one male DB-9 connector on the external peripheral interface panel
for serial device connection. Follow the steps below to connect a serial device to the
IMBA-C2160.
Step 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in
Chapter 3.
Step 2: Insert the serial connector. Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See Figure 4-17.