IEI Integration IMBA-C2160 - Manual (Page 82)

IMBA-C2160 ATX Motherboard
Page 66
4.5.2 LAN Connection
There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1: Locate the RJ-45 connectors. The locations of the USB connectors are shown
in Chapter 3.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the IMBA-C2160. See Figure 4-15.
Figure 4-15: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector. Step 0:
4.5.3 PS/2 Keyboard/Mouse Connection
The IMBA-C2160 has a PS/2 connector on the external peripheral interface panel. The
PS/2 connector is used to connect a keyboard or mouse to the system. Follow the steps
below to connect a keyboard or mouse to the IMBA-C2160.