IEI Integration IMBA-C2160 - Manual (Page 85)

IMBA-C2160 ATX Motherboard
Page 69
Figure 4-18: USB Connection
4.5.6 VGA Monitor Connection
The IMBA-C2160 has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the IMBA-C2160, please follow the instructions below.
Step 3: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 4: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 5: Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
IMBA-C2160. See Figure 4-19.