IEI Integration IMBA-C604EP - Manual (Page 71)

IMBA-C604EP ATX Server Board
Page 55
4.3.1 AT/ATX Power Mode Selection Jumper
Jumper Label: JATX_AT1
Jumper Type: 2-pin header
Jumper Settings: See Table 4-2
Jumper Location: See Figure 4-7
The AT/ATX power mode selection jumper specifies the systems power mode as AT or
ATX.
Setting Description
Closed ATX power (Default)
Open AT power
Table 4-2: AT/ATX Power Mode Selection Jumper Settings
Figure 4-7: AT/ATX Power Mode Selection Jumper Location
4.3.2 Clear CMOS Jumper
Jumper Label: CMOS_CLR1
Jumper Type: 2-pin header
Jumper Settings: See Table 4-3
Jumper Location: See Figure 4-8
To reset the BIOS, close the jumper for 3 seconds or more, and then open jumper.