IEI Integration IMBA-C604EP - Manual (Page 81)

IMBA-C604EP ATX Server Board
Page 65
Figure 4-17: VGA Connector
Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector.
4.6 Installing USB 3.0 Driver during Windows® 7 OS Installation
If installing the Windows® 7 OS by using the USB 3.0 ports, loading the USB 3.0 driver
during the OS installation is necessary. Follow the instructions below to complete the task.
Step 1: Insert the USB flash drive containing the USB 3.0 driver into one of the USB 2.0
ports on the IMBA-C604EP.
Step 2: After clicking the Install now button during the OS installation (Figure 4-18), the
Load Driver screen appears (Figure 4-19). Click Browse.