IEI Integration IMBA-C604EP - Manual (Page 80)

IMBA-C604EP ATX Server Board
Page 64
Figure 4-16: USB Connection
4.5.5 VGA Monitor Connection
The IMBA-C604EP has one female DB-15 connector on the external peripheral interface
panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor
to the IMBA-C604EP, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
IMBA-C604EP. See Figure 4-17.