IEI Integration NANO-945GSE v2.00 - Manual (Page 119)

NANO-945GSE EPIC Motherboard
Page 119

Disabled Prevents the BIOS from using 32-bit data transfers.

Enabled D EFAULT Allows BIOS to use 32-bit data transfers on supported
hard disk drives.
5.3.3 Super IO Configuration
Use the Super IO Configuration menu (
8
BIOS Menu 6) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
BIOS Menu 6: Super IO Configuration
 Parallel Port Address [Disabled]
Use the Parallel Port Address option to select the parallel port base address.
 Disabled D EFAULT No base address is assigned to the Parallel Port
 378 Parallel Port I/O port address is 378