5 lvds1 panel resolution jumper, Figure 4-7: com 2 function select jumper location, Table 4-5: com 2 function select jumper settings – IEI Integration NANO-945GSE v2.00 User Manual
Page 80: Table 4-5, Figure 4-7
NANO-945GSE EPIC Motherboard
Page 80
The COM 2 Function Select jumper sets the communication protocol used by the second
serial communications port (COM 2) as RS-232, RS-422 or RS-485. The COM 2 Function
Select settings are shown in Table 4-5.
COM 2 Function Select
Description
Short 1-2
RS-232
Default
Short 3-4
RS-422
Short 5-6
RS-485
Table 4-5: COM 2 Function Select Jumper Settings
The COM 2 Function Select jumper location is shown in Figure 4-7.
Figure 4-7: COM 2 Function Select Jumper Location
4.5.5 LVDS1 Panel Resolution Jumper
Jumper Label:
J_LCD_TYPE1
Jumper Type:
8-pin header
Jumper Settings:
See Table 4-6
Jumper Location:
See Figure 4-8
The LVDS1 Panel Resolution jumper allows the resolution of the LVDS screens
connected to the LVDS1 connector to be configured. The LVDS1 Panel Resolution jumper
settings are shown in Table 4-6.