IEI Integration NANO-945GSE v2.00 - Manual (Page 82)

NANO-945GSE EPIC Motherboard
Page 82
4.5.6 LVDS Voltage Selection
WARNING:
Permanent damage to the screen and NANO-945GSE may occur if the
wrong voltage is selected with this jumper. Please refer to the user
guide that cam with the monitor to select the correct voltage.
Jumper Label: J_VLVDS1 and J_VLVDS2
Jumper Type: 3-pin header
Jumper Settings: See Table 4-7
Jumper Location: See Figure 4-9
The LVDS Voltage Selection jumpers allow the LVDS screen voltages to be set.
J_VLVDS1 sets the voltage connected to LVDS1 and J_VLVDS2 sets the voltage for the
screen connected to LVDS2. The LVDS Voltage Selection jumper settings are shown in
Table 4-7.
LCD Voltage Select Description
Short 1-2 +3.3V LVDS
Short 2-3 +5V LVDS Default
Table 4-7: LVDS Voltage Selection Jumper Settings
The LVDS Voltage Selection jumper location. is shown in Figure 4-9.