IEI Integration NANO-945GSE v2.00 - Manual (Page 99)

NANO-945GSE EPIC Motherboard
Page 99
Figure 4-22: Dual Serial Port Connector Cable Connection
Step 4: Attach DB-9 serial port connectors to the chassis. The dual DB-9 serial port
connectors can be inserted into dual preformed holes in the chassis. Once,
inserted the DB-9 connectors should be secured to the chassis with retention
screws. Step 0:
4.8 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
 RJ-45 Ethernet cable connectors
 PS/2 devices
 Serial port devices
 USB devices
 VGA monitors
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding NANO-945GSE external peripheral interface connector
making sure the pins are properly aligned.