Figure 4-16: lpt cable connection – IEI Integration NANO-945GSE2 User Manual

Page 78

Advertising
background image

NANO-945GSE2

Page 64

Step 3:

Insert the cable connectors

.

Once the cable connector is properly aligned with

the 26-pin box-header connector on the NANO-945GSE2, connect the cable

connector to the on-board connector. See Figure 4-16.

Figure 4-16: LPT Cable Connection

Step 4:

Attach the LPT connector to the chassis. To secure the LPT interface

connector to the chassis please refer to the installation instructions that came

with the chassis.

Step 5:

Connect LPT device. Once the LPT interface connector is connected to the

chassis, the LPT device can be connected to the LPT interface connector. See

Figure 4-17

Step 0:\

Advertising
See also other documents in the category IEI Integration Hardware: