IEI Integration NANO-945GSE2 - Manual (Page 80)

NANO-945GSE2
Page 66
Figure 4-18: Dual Serial Port Connector Cable Connection
Step 4: Attach DB-9 serial port connectors to the chassis. The dual DB-9 serial port
connectors can be inserted into dual preformed holes in the chassis. Once,
inserted the DB-9 connectors should be secured to the chassis with retention
screws. Step 0:
4.8 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
RJ-45 Ethernet cable connectors
PS/2 devices
Serial port devices
USB devices
VGA monitors
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding NANO-945GSE2 external peripheral interface connector
making sure the pins are properly aligned.