IEI Integration NANO-9453 v1.10 - Manual (Page 108)

NANO-9453 EPIC Motherboard
Page 88
5.4.1 CF Card Setup
Jumper Label: JCF1
Jumper Type: 2-pin header
Jumper Settings: See Table 5-2
Jumper Location: See Figure 5-9
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave
device or the master device. CF Card Setup jumper settings are shown in Table 5-2.
CF Card Setup Description
Open Slave Default
Short Master
Table 5-2: CF Card Setup Jumper Settings
The CF Card Setup jumper location is shown in Figure 5-9.
Figure 5-9: CF Card Setup Jumper Location