IEI Integration NANO-9453 v1.10 - Manual (Page 127)

NANO-9453 EPIC Motherboard
Page 107
respective PS/2 connector on the keyboard and mouse cable. Step 0:
CAUTION:
The keyboard and mouse cable has a specific connector for the mouse
and a specific connector for the keyboard. The cable is marked. Please
make sure the devices are connected to the correct connector.
5.7.3 RJ-45 Ethernet Connection
The NANO-9453 has two RJ-45 Ethernet connectors on the external peripheral interface
panel for LAN communications. Follow the steps below to connect an RJ-45 Ethernet
connector to the NANO-9453.
Step 1: Locate the RJ-45 connector. The location of the RJ-45 connector is shown in
Chapter 3.
Step 2: Insert an RJ-45 plug. Insert the RJ-45 plug of a LAN into the RJ-45 receptacle
on the external peripheral interface. See Figure 5-24. Step 0: