IEI Integration NANO-9453 v1.10 - Manual (Page 124)

NANO-9453 EPIC Motherboard
Page 104
Step 3: Insert the cable connectors . Once the cable connectors are properly aligned
with the USB connectors on the NANO-9453, connect the cable connectors to
the onboard connectors. See Figure 5-21.
Figure 5-21: Dual USB Cable Connection
Step 4: Attach the bracket to the chassis. The USB 2.0 connectors are attached to a
bracket. To secure the bracket to the chassis please refer to the installation
instructions that came with the chassis. Step 0:
5.7 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
Mouse and keyboard
USB devices
RJ-45 Ethernet cable connectors
VGA monitors