IEI Integration NOVA-945GSE v1.01 - Manual (Page 105)

NOVA-945GSE 5.25” SBC
Page 105
Step 3: Connect the cable to the SATA disk. Connect the connector on the other end
of the cable to the connector at the back of the SATA drive. See
811H
Figure 5-14.
Step 4: Connect the SATA power cable. Connect the SATA power connector to the
back of the SATA drive. See
812H
Figure 5-14. Step 0:
Figure 5-14: SATA Power Drive Connection
5.7.6 USB Cable (Dual Port without Bracket)
The NOVA-945GSE is shipped with a dual port USB 2.0 cable. To connect the USB cable
connector, please follow the steps below.
Step 1: Locate the connectors. The locations of the USB connectors are shown in
Chapter 3.