IEI Integration NOVA-945GSE v1.01 - Manual (Page 93)

NOVA-945GSE 5.25” SBC
Page 93
Figure 5-4: AT Power Select Jumper Location
5.5.2 CF Card Setup
Jumper Label: J_CF1
Jumper Type: 2-pin header
Jumper Settings: See
785H
Table 5-3
Jumper Location: See
786H
Figure 5-5
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave
device or the master device. CF Card Setup jumper settings are shown in
787H
Table 5-3.
CF Card Setup Description
Open Slave Default
Closed Master
Table 5-3: CF Card Setup Jumper Settings
The CF Card Setup jumper location is shown in
788H
Figure 5-5.