IEI Integration NOVA-945GSE v1.01 - Manual (Page 98)

NOVA-945GSE 5.25” SBC
Page 98
5.5.6 LVDS Voltage Selection
WARNING:
Permanent damage to the screen and NOVA-945GSE may occur if the
wrong voltage is selected with this jumper. Please refer to the user
guide that cam with the monitor to select the correct voltage.
Jumper Label: J_VLVDS1
Jumper Type: 3-pin header
Jumper Settings: See
801H
Table 5-7
Jumper Location: See
802H
Figure 5-9
The LVDS Voltage Selection jumpers allow the LVDS screen voltages to be set.
J_VLVDS1 sets the voltage connected to LVDS1 and J_VLVDS2 sets the voltage for the
screen connected to LVDS2. The LVDS Voltage Selection jumper settings are shown in
803H
Table 5-7.
LCD Voltage Select Description
Short 1-2 +3.3V LVDS Default
Short 2-3 +5V LVDS
Table 5-7: LVDS Voltage Selection Jumper Settings
The LVDS Voltage Selection jumper location is shown in
804H
Figure 5-9.