IEI Integration NOVA-945GSE v1.01 - Manual (Page 92)

NOVA-945GSE 5.25” SBC
Page 92
Description Label Type
AT Power Mode Setting ATXCTL1 2-pin header
CF Card Setting J_CF1 2-pin header
Clear CMOS J_CMOS1 3-pin header
COM3 Function Select JP1 6-pin header
LVDS Panel Resolution J_LCD_TYPE1 8-pin header
LVDS Voltage Select J_VLVDS1 3-pin header
Table 5-1: Jumpers
5.5.1 AT Power Select Jumper Settings
Jumper Label: ATXCTL1
Jumper Type: 3-pin header
Jumper Settings: See
781H
Table 5-2
Jumper Location: See
782H
Figure 5-4
The AT Power Select jumper specifies the systems power mode as AT or ATX. AT Power
Select jumper settings are shown in
783H
Table 5-2.
AT Power Select Description
Open Use ATX power Default
Short Use AT power
Table 5-2: AT Power Select Jumper Settings
The location of the AT Power Select jumper is shown in
784H
Figure 5-4 below.