IEI Integration PM-LX-800 v1.0 - Manual (Page 107)

Page 107
PM-LX-800 CPU Card
Power Management [APM]
Use the Power Management option to set the power management type used by the
system.
Disabled All power management options are turned off. The only user
configurable options are the power button and alarm settings.
Legacy Standby and suspend modes can be set.
APM (Default) Advanced power management (APM) is activated
ACPI Advanced Configuration and Power Interface (ACPI) is
activated.
x Standby Mode [Disabled]
The Standby Mode option can only be selected if the Power Management option is set
to Legacy. The Standby Mode specifies the amount of time the system can be inactive
before the system enters standby mode. The Standby Mode options are:
Disabled (Default)
1 Sec
5 Sec
10 Sec
15 Sec
30 Sec
45 Sec
1 Min
5 Min
10 Min
15 Min
30 Min
45 Min
60 Min
90 Min
120 Min