Ide disk drive installation, 4 ide disk drive installation, Figure 4-2: connection of ide connector – IEI Integration PM-LX-800 v1.0 User Manual
Page 71: Table 4-1: iei provided cables
Page 71
PM-LX-800 CPU Card
Quantity Type
1 USB
cable
1 VGA
cable
1 LAN
cable
1 Power
cable
Table 4-1: IEI Provided Cables
4.3.4 IDE Disk Drive Installation
The cable used to connect the motherboard to the IDE HDD is a standard 44-pin ATA33
flat cable. To connect an IDE HDD to the motherboard, follow the instructions below.
Step 1:
Step 2:
Step 3:
Step 4:
Find the ATA33 flat cable in the kit that came with the motherboard.
Connect one end of the cable to the IDE1 connector on the motherboard. A
keyed pin on the IDE connectors prevents it from being connected incorrectly.
Locate the red wire on the other side of the cable that corresponds to the pin 1
connector.
Connect the other end of the cable to the HDD making sure that the pin 1 cable
corresponds to pin 1 on the connector.
Step 0:
Figure 4-2: Connection of IDE Connector