IEI Integration PM-LX-800 v1.10 - Manual (Page 50)

Page 50
IEI® Technology, Corp.
Figure 3-12: LED Power Connector Location
3.2.11 Parallel Port Connector
CN Label: LPT1
CN Type: 26-pin header (2x13 pins)
CN Pinouts: See Table 3-13
CN Location: See Figure 3-13
The parallel port connector connects to a printer. The PM-LX-800 comes with a
multi-mode (ECP/EPP/SPP) parallel port. The CN20 parallel port interface features a
26-pin flat-cable connector that requires an adapter cable if a traditional DB-25 connector
is preferred. The parallel interface can be re-assigned to LPT2 or LPT3 through the BIOS
configuration utility. The default interrupt channel is IRQ7. Select ECP or EPP DMA mode
using the BIOS configuration utility.