IEI Integration PM-LX-800 v1.10 - Manual (Page 66)

Page 66
IEI® Technology, Corp.
4.1 Installation Considerations
NOTE:
The following installation notices and installation considerations should be
read and understood before the motherboard is installed. All installation
notices pertaining to the installation of the motherboard should be strictly
adhered to. Failing to adhere to these precautions may lead to severe
damage of the motherboard and injury to the person installing the
motherboard.
4.1.1 Installation Notices
Before and during the installation of the PM-LX-800 motherboard:
Read the user manual
o
The user manual provides a complete description of the PM-LX-800
motherboard, installation instructions and configuration options.
Wear an electrostatic discharge cuff (ESD)
o
Electronic components are easily damaged by ESD. Wearing an ESD cuff
will remove ESD from your body and help to prevent ESD damage.
Place the motherboard on an antistatic pad
o
When installing or configuring the motherboard, place it on an antistatic
pad. This will help to prevent potential ESD damage.
Turn off all power to the PM-LX-800 motherboard
o
When working with the motherboard, make sure that it is disconnected
from all power supplies and that no electricity is being fed into the system.
Before and during the installation of the PM-LX-800 motherboard, DO NOT:
Remove any of the stickers from the PCB. These stickers are required for
warranty validation.
Use the product before you have verified that all cables and power connectors
are properly connected.
Allow screws to contact the PCB, connector pins, or its components.