Figure 3-21: jumper locations – IEI Integration PM-LX-800 v1.10 User Manual
Page 63
Advertising
Page 63
PM-LX-800 CPU Card
Figure 3-21: Jumper Locations
NOTE:
The PM-LX-800 does not provide a “Clear CMOS” configuration jumper. If the system
fails to boot due to improper BIOS settings, reset the CMOS contents by
disconnecting and reconnecting the BT1 battery connector. Use small-sized needle
nose pliers to carefully disconnect and reconnect the BT1 battery connector.
Advertising