IEI Integration PM-LX-800 v1.10 - Manual (Page 89)

Page 89
PM-LX-800 CPU Card
Enabled Activates automatically when the system boots up
causing a warning message to appear when anything
attempts to access the boot sector or HDD partition table.
Disabled (Default) No warning message appears when there is an attempt
to access the boot sector or HDD partition table.
CPU Internal Cache [Enabled]
Use the CPU Internal Cache option to enable or disable the internal CPU cache.
Disabled The internal CPU cache is disabled.
Enabled (Default) The internal CPU cache is enabled.
Boot From LAN Control [Disabled]
Use the BOOT From LAN Control option to enable the system to be booted from a
remote system.
Disabled (Default) The system cannot be booted from a remote system
through the LAN.
Enabled The system can be booted from a remote system
through the LAN.
SATA Boot ROM Control [Disabled]
Use the SATA Boot ROM Control option to configure SATA IDE use in DOS mode.
Disabled (Default) Disables SATA IDE use in DOS mode.
Enabled Enables SATA IDE use in DOS mode.
Boot Device
Use the Boot Device options to select the order of the devices the system boots from.
There are three boot device configuration options: