IEI Integration PM-LX2-800 User Manual
Page 107
PM-LX2-800 User Manual
Page 107
320 x 240
640 x 480
800 x 600 (Default)
1024 x 768
1152 x 864
1280 x 1024
1600 x 1200
Flat Panel Data Bus Type [9 – 24 bits, 1 ppc]
The Flat Panel Data Bus Type option can only be configured if the Flat Panel Type
option is not set to Auto. Use the Flat Panel Data Bus Type option to set the bus type
and the data bus width used to transfer data between the system and the flat panel screen
connected to the system. The Flat Panel Data Bus Type options are:
9-24 bits, 1 pixel/clock (Default)
18, 24 bits, 2 pixels/clock
Refresh Rate [60Hz]
The Flat Panel Refresh Rate option can only be configured if the Flat Panel Type option
is not set to Auto. Use the Flat Panel Refresh Rate option to set the screen refresh rate
required by the panel connected to the system. Check the documentation that came with
the panel before setting this option. The Flat Panel Refresh Rate options are:
60Hz
(Default)
70Hz
72Hz
75Hz
85Hz
90Hz
100Hz
Horizontal Sync Polarity [Low]