IEI Integration PM-LX2-800 - Manual (Page 83)

PM-LX2-800 User Manual
Page 83
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
Configure Super I/O Chipset
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Serial Port1 Address
[3F8]
Serial Port1 IRQ [4]
Serial Port2 Address [2F8/IRQ3]
Serial Port2 IRQ [4]
Serial Port3 Address [3E8]
Serial Port3 IRQ [3]
Parallel Port Address [378]
Parallel Port Mode [Normal]
Parallel Port IRQ [IRQ7]
Allows BIOS to select
Serial Port Base
Addresses
Select Screen
↑ ↓ Select
Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 7: Super IO Configuration
Serial Port1 Address [3F8]
Use the Serial Port1 Address option to select the Serial Port 1 base address.
Disabled No base address is assigned to Serial Port 1
3F8 D EFAULT Serial Port 1 I/O port address is 3F8 and the interrupt
address is IRQ4
3E8 Serial Port 1 I/O port address is 3E8 and the interrupt
address is IRQ4
2E8 Serial Port 1 I/O port address is 2E8 and the interrupt
address is IRQ3
Serial Port1 IRQ [4]
Use the Serial Port1 IRQ option to select the interrupt address for serial port 1.
3 Serial port 1 IRQ address is 3
4 D EFAULT Serial port 1 IRQ address is 4
10 Serial port 1 IRQ address is 10
11 Serial port 1 IRQ address is 11