IEI Integration WAFER-945GSE2 v2.00 - Manual (Page 33)

WAFER-945GSE2 3.5" Motherboard
Page 18
Pin Description
1 +12V
2 GND
3 GND
4 +5V
Table 3-3: ATX Power Connector Pinouts
3.2.2 ATX Power Supply Enable Connector
CN Label: ATXCTL1
CN Type: 3-pin wafer
CN Location: See Figure 3-4
CN Pinouts: See Table 3-4
The ATX power supply enable connector enables the WAFER-945GSE2 to be connected
to an ATX power supply. In default mode, the WAFER-945GSE2 can only use an AT
power supply. To enable an ATX power supply, the AT Power Select jumper must also be
configured. Please refer to Chapter 4 for more details.
Figure 3-4: ATX Power Supply Enable Connector Location
Pin Description
1 +5V Standby