IEI Integration WAFER-945GSE2 v2.00 - Manual (Page 45)

WAFER-945GSE2 3.5" Motherboard
Page 30
The PC/104 power input connector provides power to the PC/104 expansion module
installed on the PC/104 slot.
Figure 3-15: PC/104 Power Input Connector Pinouts
Pin Description
1 -5V
2 GND
3 -12V
Table 3-16: PC/104 Power Input Connector Pinouts
3.2.14 Power Button Connector
CN Label: PWRBTN1
CN Type: 2-pin wafer
CN Location: See Figure 3-16
CN Pinouts: See Table 3-17
The power button connector is connected to a power switch on the system chassis to
enable users to turn the system on and off.
Figure 3-16: Power Button Connector Location