IEI Integration WAFER-945GSE2 v2.00 - Manual (Page 61)

WAFER-945GSE2 3.5" Motherboard
Page 46
Setting Description
Short 1-2 Keep CMOS Setup (Default)
Short 2-3 Clear CMOS Setup
Table 4-4: Clear BIOS Jumper Settings
Figure 4-4: Clear BIOS Jumper Location
4.4.4 COM 2 Function Select Jumper
Jumper Label: JP1
Jumper Type: 8-pin header
Jumper Settings: See Table 4-5
Jumper Location: See Figure 4-5
The COM 2 Function Select jumper sets the communication protocol used by the second
serial communications port (COM 2) as RS-232, RS-422 or RS-485.
Setting Description
Short 1-2 RS-232 (Default)
Short 3-4 RS-422
Short 5-6 RS-485
Short 5-6
Short 7-8
RS-485 with RTS control
Table 4-5: COM 2 Function Select Jumper Settings