IEI Integration ECW-281B_D2550 - Manual (Page 34)

ECW-281B-D2550 Embedded System
Page 20
WARNING:
Over-tightening bottom cover screws will cause damage to the bottom
surface. Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm).
3.4 Full-size PCIe Mini Card Installation
To install a full-size PCIe Mini card, please follow the steps below.
Step 1: Remove the bottom surface. See Section
765
3.2 .
Step 2: Locate the full-size PCIe Mini card slot (Figure 3-6).
Figure 3-6: Full-size PCIe Mini Card Slot Location
Step 3: Remove the retention screw secured on the motherboard as shown in
Figure 3-7 .