IEI Integration ECW-281B_B2-D525 - Manual (Page 58)

ECW-281B/B2-D525 Embedded System
Page 45
Step 1: Attach the DIN rail mounting bracket to the bottom panel of the embedded
system. Secure the bracket to the embedded system with the supplied retention
screws (
765
Figure 4-14 ).
Figure 4-14: DIN Rail Mounting Bracket
Step 2: Make sure the inserted screw in the center of the bracket is at the lowest
position of the elongated hole (
765
Figure 4-15 ).
Figure 4-15: Screw Locations
Step 3: Place the DIN rail flush against the back of the mounting bracket making sure
the edges of the rail are between the upper and lower clamps (
765
Figure 4-16 ).