IEI Integration ECW-281B_B2-D525 - Manual (Page 70)

ECW-281B/B2-D525 Embedded System
Page 57
Î Hyper Threading [Enabled]
Use the Hyper Threading function to enable or disable the CPU hyper threading function.
Î
Disabled Disables the use of hyper threading technology
Î
Enabled D EFAULT
Enables the use of hyper threading technology
5.3.3 IDE Configuration
Use the IDE Configuration menu (
6
BIOS Menu 5 ) to change and/or set the configuration
of the IDE devices installed in the system.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
SATA Configuration
SATA Port0
Not Present
SATA Port1 Not Present
SATA Port2 Not Present
SATA Port3 Not Present
ATA/IDE Configuration
[Enhanced]
Configure SATA as [IDE]
Select ATA/IDE
Configuration.
---------------------
ÅÆ: Select Screen
↑ ↓: Select Item
Enter
Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 5: IDE Configuration
Î ATA/IDE Configurations [Enhanced]
Use the ATA/IDE Configurations option to configure the ATA/IDE controller.
Î
Disabled
Disables the on-board ATA/IDE controller.
Î
Compatible Configures the on-board ATA/IDE controller to be in
compatible mode. In this mode, a SATA channel will
replace one of the IDE channels. This mode supports up
to 4 storage devices.