IEI Integration uIBX-200 v1.10 - Manual (Page 16)

UIBX-200-R11/Z510P Embedded System
Page 6
2.1 Front Panel
The front panel consists of a small door, giving access to the CompactFlash® card, and
also has two USB ports, an audio output and microphone input jack.
Figure 2-1: Front Panel
Connectors and buttons on the front panel include the following.
ƒ 1 x CompactFlash® slot
ƒ 2 x USB connectors
ƒ 1 x Microphone input
ƒ 1 x Line output
ƒ 1 x AT/ATX switch
ƒ 1 x Reset button
2.2 Rear Connector Panel
All external peripheral interface connectors are located on the bottom panel of the
UIBX-200-R11/Z510P . The peripheral interface connectors are shown in Figure 2-2.