IEI Integration uIBX-200 v1.10 - Manual (Page 37)

UIBX-200-R11/Z510P Embedded System
Page 27
Step 1: Locate the female DB-15 connector . The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector . Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
UIBX-200-R11/Z510P. See Figure 4-14.
Figure 4-14: VGA Connector
Figure 4-15: VGA Connector
Pin Description Pin Description
1 RED 2 GREEN
3 BLUE 4 NC
5 GND 6 GND