IEI Integration uIBX-200 v1.10 - Manual (Page 34)

UIBX-200-R11/Z510P Embedded System
Page 24
STATUS DESCRIPTION STATUS DESCRIPTION
GREEN Activity YELLOW Linked
Table 4-5: RJ-45 Ethernet Connector LEDs
4.5.4 Serial Port Connector
CN Label: RS-232
CN Type: DB-9 connectors
CN Location:
See Figure 4-5
CN Pinouts: See Table 4-6 and Figure 4-12
RS-232 serial port devices can be attached to the DB-9 ports on the rear panel.
Step 1: Locate the DB-9 connector . The location of the DB-9 connector is shown in
Chapter 3 .
Step 2: Insert the serial connector . Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See Figure 4-11.
Figure 4-11: Serial Device Connector