IEI Integration TANK-101B-D525_N455 v1.00 - Manual (Page 26)

TANK-101B/BW Em b e d d e d S ys te m
P a g e 16
S te p 3: Attach the HDD to the HDD bracket, and then slide the HDD to connect the HDD
to the SATA connector (Figure 3-4).
Figure 3-4: HDD Installation
S te p 4: Secure the HDD with the HDD bracket by four retention screws (Figure 3-4).
S te p 5: Reconnect the SATA signal and power cables to the TANK-101B/BW.
S te p 6: Reinstall the bottom panel.
3.4 Mo u n tin g th e S ys te m with Mo u n tin g Bra c ke ts
To mount the embedded system onto a wall or some other surface using the two mounting
brackets, please follow the steps below.
S te p 1: Turn the embedded system over.
S te p 2: Align the two retention screw holes in each bracket with the corresponding
retention screw holes on the sides of the bottom surface.