IEI Integration TANK-101B-D525_N455 v1.00 - Manual (Page 83)

TANK-101B/BW Em b e d d e d S ys te m
P a g e 73
Figure A-14: Select a Local Source Drive
S te p 6: Select a source partition (Part 1) from basic drive as shown in
780H780H
Figure A-15.
Then click OK.
Figure A-15: Select a Source Partition from Basic Drive
S te p 7: Select 1.2: [Recovery] NTFS drive and enter a file name called iei
(
781H781H
Figure A-16). Click Save. The factory default image will then be saved in the
selected recovery drive and named IEI.GHO.
WARNING:
The file name of the factory default image must be iei.GHO .