IEI Integration TANK-6000-C226 - Manual (Page 26)

TANK-6000-C226 Em b e d d e d S ys te m
P a g e 16
3.3.2 S e ria l ATA 3.0 Drive In s ta lla tio n
To install the hard disk drive to the SATA 3.0 driver bay, please follow the steps below:
S te p 1: Unlock the HDD drive bay using the key. The keys can be found in the packing
list.
Figure 3-4: HDD Drive Bay
S te p 2: Loosen two HDD bracket retention screws and lift the HDD bracket out of the
TANK-6000-C226.
Figure 3-5: HDD Bracket Retention Screws
S te p 3: Slide the HDD to the HDD bracket and secure the HDD to the bracket using four
retention screws.